ATR 171 thermoregulator 72x72mm format , with dual 4-digits display for high visibility in the industrial environment, distinguished by high configurability.
Two inputs can be programmed for a wide range of sensors. Power supply range from 24 to 230V AC/DC .The digital input allows external activation of various functions, including the Timer for delayed start or timed control.
ATR243 thermoregulator represents the top of the range and is the most versatile model of controllers in the 48×48 mm format (1/16 DIN). The functions of the ATR243 software include the PID hot-cold control algorithm, open-close logic for valve control, programming of a control cycle (mini cycle up to 3 step – slow raise / direct raise / temperature holding time ), maximum current threshold alarm.
ATR 902 , designed for the automation of hobby and professional kilns for ceramics, glass or laboratory applications, allows the programming of 15 cycles/programs that can provide up to 18 steps/segments, all of which can be configured by the user as raise/maintain/lower. Being a detachable hand microprocessor it is very useful for Schools , to prevent unauthorized use of the kiln .
ATR 421 is a microprocessor 48x96mm (1/8 DIN), single control loop. Allows the programming of 15 cycles/programs that can provide up to 45 steps/segments, all of which can be configured by the user as raise/maintain/lower. Programming mode of the work cycle that is intuitive and simple to use even for inexpert operators. MEMORY-CARD or parameter setting software help the installer configure the device quickly and easily .
ATR 621 microprocessor is the most widely used microprocessor in electric kilns. Format 72x72mm, single control loop. Allows the programming of 15 cycles/programs that can provide up to 45 steps/segments, all of which can be configured by the user as raise/maintain/lower. Step end wait software functions (in case of a delay of the process on the programmed setpoint value) and Cycle Recovery mode (after a power cut-off) are the main features of this microprocessor.
ATR 313 microprocessor is the most widely used microprocessor in large gas and electric kilns. Has an LCD display 251x146mm, and is integrated by the Acquisition/Actuation Module PL300. It constitutes a complete and flexible control system for managing thermal processes in industrial kilns, dryers and environmental control chambers. Graphic display of cycle trends and internal recorder to monitor up to 6 traces. Events list with date/time.