DE STICKING OIL FOR CLAY RELEASING FROM METAL MOULDS

DE STICKING OIL

The de sticking oil (improperly called “oil” because it is actually a chemical product made with vegetable oleins), is a release agent used for de stick the plastic clay from the metal moulds after shaping ceramic objects with rotating presses or pressing it with hydraulic presses. Being a vegetable-based product it is odorless, colorless (it has a slightly straw-colored color) and has a high release power.

Notwithstanding the touch it is really a little fat liquid, it allows to have a very high efficiency in shaping / pressing.

From tests done practically, it let you make two / three times the production you can make using other release agents on the market. Which means that with a liter of our product you can make two or three times the number of pieces you can make using another agent.

The release agent supplied by us does not leave greasy residues or spots on the surface of the objects, thus allowing to avoid that during the glazing the clay refuse it making leopard stains.

Moreover products made on a petrochemical basis can cause skin irritation to the touch, as well as problems with the respiratory system due to prolonged inhalation of the vapors released by them. These effects are extremely limited with the use of our product, but obviously this does not exempt operators from using suitable, adequate and recommended PPE (Personal Protective Equipment).

This de sticking oil is very suitable for the use of various clay bodies such as terracotta, earthenware, gres, refractory and is widely used to produce flower pots , artistic pottery in general, terracotta tiles, shaped or pressed artistic ceramics, as well as in the refractory and technical ceramics industry for dry pressing